Gamepad Test

Check that your controller works in the browser. See which buttons are pressed and how far the sticks and triggers move. Nothing to install, and it works with Xbox, PlayStation, Switch Pro and most USB or Bluetooth controllers.

How to use

  1. Connect a controller over USB or Bluetooth.
  2. Press A (✕ on PlayStation, B on Nintendo) or Start, or click the button above, to open the tester.
  3. Press any button so the browser detects the controller.
  4. Press each button and move each stick. The tester updates every frame.

What the test shows

Button numbers

Controllers with the standard layout use these numbers. Xbox names come first, then PlayStation.

NumberButton
0A / Cross
1B / Circle
2X / Square
3Y / Triangle
4LB / L1
5RB / R1
6LT / L2
7RT / R2
8View / Share
9Menu / Options
10Left stick press / L3
11Right stick press / R3
12–15D-pad up, down, left, right
16Xbox / PS button

Axes 0 and 1 are the left stick and axes 2 and 3 are the right stick, horizontal then vertical. Up and left read as negative values.

Troubleshooting

The controller isn’t detected

Browsers hide controllers until you press a button, so press one after the tester opens. If it still doesn’t show up, try another USB cable or port, re-pair it over Bluetooth, or close apps such as Steam that may take over the controller.

The button numbers don’t match

If the tester says “non-standard”, the browser doesn’t know your controller’s layout, and its buttons can use different numbers. This is common with older or generic controllers.

A stick moves on its own

If an axis stays well away from 0.00 when you aren’t touching the stick, the controller has stick drift. Small values, under about 0.10, are normal, and most games ignore them.